Quantcast
Channel: José Santamarta Flórez
Viewing all 10464 articles
Browse latest View live

Eólica en Grecia: Siemens Gamesa suministra 60 MW a tres proyectos

$
0
0
Siemens Gamesa ha firmado durante octubre de 2017 tres nuevos contratos con dos promotores independientes (IPP) para el suministro de aerogeneradores con 60 MW a tres parques eólicos en Grecia. 

Siemens Gamesa ha firmado durante octubre de 2017 tres nuevos contratos con dos promotores independientes (IPP) para el suministro de 60 MW a tres parques eólicos en Grecia.

En concreto, la compañía ha acordado con uno de los promotores locales el suministro de turbinas a dos proyectos eólicos onshore: 8 aerogeneradores G114-2.0 MW en el parque Kali Hitsa (16 MW), ubicado en Aetolia-Acarnania, al sur del país, y otras 12 unidades del modelo G90-2.0 MW al parque Litharoserma (24 MW), localizado en la misma región.

Adicionalmente, Siemens Gamesa ha firmado un tercer contrato con otro promotor griego para la entrega de 10 turbinas de 2 MW, alcanzando un total de 20 MW.

Las máquinas se suministrarán durante la segunda mitad de 2018 y la compañía se encargará de las tareas de operación y mantenimiento de los tres parques por un periodo de diez años.

Siemens Gamesa ha instalado cerca de 500 MW en Grecia, un país donde además mantiene 241 MW.







Costs come down again in 1 GW German onshore wind energy auction

$
0
0
The results are in from the latest German onshore auction and costs have fallen again. The average support price is €38/MWh. The lowest bid was €22/MWh. 

The auction was oversubscribed. 210 bids were issued with a volume of 2591 MW. The German federal network regulator awarded 1004 MW to 61 projects. 60 of the 61 winning projects are community wind farms, representing 99.2% of the capacity auctioned.
‘Pay as clear’ rules apply to the community projects, meaning all these will get €38.2/MWh. Most projects were awarded to North Rhine-Westphalia (17) and Brandenburg (16). They won around 270 megawatts each.
“It’s good to see the costs of onshore wind falling again,” said Pierre Tardieu, WindEurope Chief Policy Officer. “The previous two auctions yielded prices of €57.1/MWh and €42/MWh. Now we’re already at €38/MWh. This cost reduction is driving wind energy to become the leading source of electricity in the EU soon after 2030, as recently stated by the IEA.
“But this auction also raises the concern that Germany is set for a slowdown in installations in 2019 and 2020. The current auction design give so-called community projects longer lead time to build the project. A slowdown and non-realisation of certain projects will hit manufacturers, suppliers, and others in the supply chain. It’s unsettling to see this slowdown in Europe’s leading market at a time of increasing global competition.
The system also allows community projects to bid without a permit. Ordinary projects are at a competitive disadvantage as they are locked in the existing technologies specified in their permits. Community projects on the other hand can factor in the better yields of future turbines when bidding.
“These shortcomings in the auction design were already recognised after the first onshore tender in May this year. Having a permit needs to be a prerequisite for participation in onshore auctions in 2018 and beyond.”


Nordex offers new sound concept, now also for existing wind turbines

$
0
0
For Generation Delta turbines, the Nordex Group offers solutions specifically for noise-sensitive sites, which increase turbine output while maintaining sound emissions at the same level. The manufacturer is now widening this range with the "Xtended Power Sound Concept" solution package that also covers N100/2500 and N117/2400 turbines from Generation Gamma as well as Generation Delta machines as a retrofit option. Two independent but complementary products – Sound Mode Optimisation and Serrations - enable customers to benefit from significant reductions in sound power levels while at the same time increasing turbine yield by up to 13 per cent. In addition to these two products, the offer also includes a site-specific analysis of the potential for noise reduction, taking official requirements into account. The Nordex Group also carries out any new noise measurements that may also be required by authorities. 


Normally the turbine's output is lowered in order to minimise noise, reducing the rpm in the generator and thus the rotation speed of the rotor blades. By specifically raising the torque, the Sound Mode Optimisation upgrade makes it possible to improve the power curve while maintaining the same rpm and sound power level. The Sound Mode Optimisation upgrade means that the turbine can operate by a large number of noise-optimised modes. These can be individually set on the basis of wind direction, outside temperature or even public holidays. In this way the acoustic load is reduced in line with site requirements while output is increased.

With Serrations – components added to the trailing edges of the blades on site – the sound power level of the turbines is constantly reduced by around 1.5 decibels. The turbine is quieter overall and allows the operator to change into a higher operating mode.

Both products – Serrations and Sound Mode Optimisation – are also available individually, depending on the results of site-specific analyses. The "Xtended Power Sound Concept“ upgrade package is immediately available for N100/2500 and N117/2400 turbines in Generation Gamma as well as for Generation Delta turbines, which were previously not included in this range of products.


The Group has installed more than 21 GW of wind energy capacity in over 25 markets and in 2016 generated revenues of EUR 3.4 billion. The company currently employs a workforce of approx. 5,000. The joint manufacturing capacity includes factories in Germany, Spain, Brazil, the United States and India. The product portfolio is focused on onshore turbines in the 1.5 to 4.5 MW class, which are tailor-made for the market requirements in developed and emerging markets. 




 

Vestas develops wind energy in Russia

$
0
0
Following the success of Vestas and OOO Fortum Energy in Russia’s first wind energy auction, the two companies have signed the first order of a binding framework agreement. The framework agreement engages Vestas to supply its 4 MW platform for wind energy projects in the world’s fourth largest electricity market, while the order includes 14 V126-3.6 MW turbines for a 50 MW project at an undisclosed site. The announcement references company announcement no. 25 of 21 June 2017. 

With the agreement, Vestas and OOO Fortum Energy will together lead the expansion of wind energy in Russia and work with local partners to establish a strong local manufacturing and supply chain capacity. This includes setting up a blade factory in the region of Ulyanovsk, as well as a nacelles assembly plant in Nizhny Novgorod region, and a towers factory in the Rostov region.

To build up and establish high standards for the relatively young Russian renewables sector, Vestas will provide its experience across the entire wind energy value chain. Among other things, this includes assistance with project siting for all wind power plants, Vestas’ market-leading products and service solutions, the establishment of local manufacturing footprint, supply chain localisation and optimisation, and turbine installation.

“As the global leader in wind energy, it is an expression of our commitment to Russia that Vestas, together with Fortum Energy, takes a strong role in helping the world’s fourth largest electricity market towards a more sustainable energy mix. Vestas will deliver its most advanced technology through our 4 MW platform as well as market-leading cost of energy and local manufacturing and supply-chain expertise that will provide affordable, sustainable energy and create long-term jobs across different Russian regions,” states Nils de Baar, President of Vestas Central Europe.    







Vestas desarrolla la energía eólica en Rusia

$
0
0
Tras el éxito de Vestas y OOO Fortum Energy en la primera subasta de energía eólica de Rusia, las dos empresas han firmado el primer pedido de aerogeneradores un acuerdo marco vinculante.
El acuerdo marco compromete a Vestas a suministrar su plataforma de 4 MW para proyectos de energía eólica en el cuarto mercado de electricidad más grande del mundo, mientras que el pedido incluye 14 turbinas V126-3.6 MW para un proyecto de 50 MW en un sitio no revelado. 
 Con el acuerdo, Vestas y OOO Fortum Energy liderarán conjuntamente la expansión de la energía eólica en Rusia y trabajarán con socios locales para establecer una fuerte capacidad de fabricación y cadena de suministro local. Esto incluye la instalación de una fábrica de cuchillas en la región de Ulyanovsk, así como una planta de montaje de góndolas en la región de Nizhny Novgorod, y una fábrica de torres en la región de Rostov.
Para construir y establecer altos estándares para el sector de las energías renovables ruso relativamente joven, Vestas proporcionará su experiencia en toda la cadena de valor de la energía eólica. Entre otras cosas, esto incluye asistencia con la ubicación de proyectos para todas las plantas de energía eólica, los productos y soluciones de servicio líderes en el mercado de Vestas, el establecimiento de la huella de fabricación local, la localización y optimización de la cadena de suministro y la instalación de turbinas.
“Como líder mundial en energía eólica, es una expresión de nuestro compromiso con Rusia que Vestas, junto con Fortum Energy, asuma un papel importante para ayudar al cuarto mercado de electricidad más grande del mundo hacia una combinación energética más sostenible. Vestas ofrecerá su tecnología más avanzada a través de nuestra plataforma de 4 MW, así como el costo de energía líder en el mercado y la experiencia local de fabricación y cadena de suministro que proporcionará energía asequible y sostenible y creará empleos a largo plazo en diferentes regiones rusas “, afirma Nils de Baar, presidente de Vestas para Europa Central.



Siemens Gamesa Renewable Energy to present new products at WindEurope 2017 in Amsterdam

$
0
0
Siemens Gamesa Renewable Energy (SGRE) will be present at WindEurope 2017, the industry’s largest exhibition of the year, presenting its new products. From November 28th to 30th, more than 8,000 wind power professionals will gather at the Amsterdam RAI Exhibition and Convention Centre to discover the latest development of the industry. The introduction of the new wind turbines for onshore and offshore by SGRE will mark one of the most important milestones of the event.

SGRE offers the most comprehensive offer of products and service innovations for all type of sites, providing its customers with the best solutions to lower the cost of energy and maximize the profitability of their projects. Furthermore, digital remote diagnostics services and a modular service portfolio allow for reducing down times to a minimum and making technician assignments as cost-efficient as possible. The SGRE product offering will be presented at the 198 square meter booth at the trade show (Hall 1, Stand 1D44).
“Our goal has always been to provide customers – both existing and future – with product choices that best respond to their needs, building on our extensive experience in both onshore and offshore, and drawing on our combined expertise and technological know-how. These products will allow us to strengthen our position in global markets and help our customers to meet their cost-out targets”, explains Siemens Gamesa Renewable Energy CEO, Markus Tacke.
The company’s leadership will be further highlighted by the presence of Tacke as event ambassador. Siemens Gamesa CEO will take part on a panel discussion during the opening session together with other industry executives. On November 28, 2017 SGRE will host the official opening reception at its booth from 17.30-19.30. This industry networking event is open to all delegates who have a valid exhibition pass for that day. Furthermore, the company will be represented in the conference side of the event by up to seven other speakers covering topics such as the operation of wind turbines in extreme weather conditions, big data and data security, life extension and repowering, among others. The full programme of conferences can be accessed under: https://windeurope.org/confex2017/conference/programme/.
Visit Siemens Gamesa booth at WindEurope 2017: Hall 1, Stand 1D44





 

Siemens Gamesa Renewable Energy presentará sus nuevos productos en la feria eólica WindEurope 2017

$
0
0
Siemens Gamesa Renewable Energy (SGRE) estará presente en WindEurope 2017, la exposición anual más grande y multitudinaria del sector, donde presentará sus nuevos productos. Del 28 al 30 de noviembre, más de 8.000 profesionales del sector de la energía eólica se reunirán en el Amsterdam RAI Exhibition & Convention Centre para descubrir los últimos desarrollos de la industria. La presentación de los nuevos aerogeneradores onshore y offshore de SGRE supondrá uno de los hitos más relevantes de la feria.

SGRE aporta la gama más completa de productos y servicios innovadores para todo tipo de instalaciones, brindando a sus clientes las mejores soluciones para reducir los costes de energía y maximizar la rentabilidad de sus proyectos. Además, los servicios de diagnóstico digital remoto y una cartera de servicios modulares permiten reducir al mínimo los tiempos de inactividad y hacer que las tareas de los técnicos sean lo más rentables posible. La oferta de productos de SGRE se presentará en el stand de 198 m2 (Hall 1, Stand 1D44) ubicado en la feria.
“Nuestro objetivo ha sido siempre facilitar a nuestros clientes -tanto actuales como futuros- la cartera de productos que mejor responda a sus necesidades, apoyándonos en nuestra extensa experiencia tanto en proyectos onshore como offshore, aprovechando al máximo nuestra combinación de expertise y conocimiento tecnológico. Estos productos permitirán reforzar nuestra posición en el mercado global y ayudarán a nuestros clientes cumplir con sus estrictos objetivos de reducción de costes”, explicó Markus Tacke, CEO de Siemens Gamesa Renewable Energy.
El liderazgo sectorial de la compañía se verá resaltado por la presencia de Tacke como uno de los embajadores del evento. El CEO de Siemens Gamesa participará en un panel durante la sesión de inauguración junto con otros altos ejecutivos del sector. El 28 de noviembre, SGRE acogerá la recepción oficial de bienvenida en su stand, entre las 17:30 y las 19:30 horas. Además, la compañía estará representada por hasta siete expertos que tratarán temas tan diversos como la operación de los aerogeneradores en condiciones climáticas extremas, big data y seguridad, o ampliación de vida útil y repotenciación, entre otros. Aquí puede consultar el programa completo de conferencias: https://windeurope.org/confex2017/conference/programme/.



Wind energy in Turkey: Nordex wind turbines for a wind farm

$
0
0
The Nordex Group has received another contract from Turkey. From April 2018 onwards, it will be installing nine turbines with a total capacity of 30 megawatts in the Province of Izmir. The customer is Umut Insaat, which is constructing the sixth project in Turkey with Nordex with this order. 


Located at an altitude of 1,200 metres, the site is characterized by good wind conditions. For this reason, the customer has decided to order N117/3600 and N117/3000 turbines, which are designed for these wind conditions. Nordex will be supplying key components for the turbines from within Turkey in order to increase local manufacturing content.

The Group has installed wind power capacity of more than 21 GW in over 25 markets, generating sales of EUR 3.4 billion in 2016. It currently has roughly 5,000 employees. The production network comprises plants in Germany, Spain, Brazil, the United States and India. The product range primarily concentrates on onshore turbines in the 1.5 – 4.5 MW class addressing the requirements of developed as well as emerging markets. 





 

Energía eólica en Turquía: Aerogeneradores de Nordex para un parque eólico

$
0
0
Nordex ha recibido otro contrato de Turquía. A partir de abril de 2018, se instalarán nueve turbinas eólicas con una capacidad total de 30 megavatios en la provincia de Izmir. El cliente es Umut Insaat, que está construyendo el sexto proyecto en Turquía con Nordex con este pedido.

Situado a una altitud de 1.200 metros, el sitio se caracteriza por buenas condiciones de viento. Por esta razón, el cliente ha decidido pedir turbinas N117 / 3600 y N117 / 3000, que están diseñadas para estas condiciones de viento. Nordex suministrará componentes clave para los aerogeneradores dentro de Turquía con el fin de aumentar el contenido de fabricación local.
El Grupo ha instalado una capacidad de energía eólica de más de 21 GW en más de 25 mercados, generando ventas de 3.400 millones de euros en 2016. Actualmente cuenta con aproximadamente 5.000 empleados. La red de producción comprende plantas en Alemania, España, Brasil, Estados Unidos e India. La gama de productos se concentra principalmente en turbinas en tierra en la clase de 1,5 a 4,5 MW que satisfacen los requisitos de los mercados desarrollados y emergentes.



 
 
 

Eólica en en Tailandia: Siemens Gamesa suministrará más de 100 aerogeneradores con 260 MW

$
0
0
Estos aerogeneradores, del modelo G126-2.5 MW, serán los más altos que se instalen en Asia con 215 metros de altura.

Siemens Gamesa Renewable Energy ha dado un paso más en su posicionamiento en Asia Pacífico con su mayor contrato en Tailandia, un mercado donde la compañía se ha consolidado como el primer fabricante con más de la mitad del total de MW instalados en el país.
En concreto, Siemens Gamesa ha llegado a un acuerdo con el promotor Zhongnan Engineering Corporation para el suministro de 103 turbinas del modelo G126-2.5 MW (260 MW) al complejo eólico Hanuman, ubicado en la provincia de Chaiyaphum, al noreste de Tailandia.
Con este contrato, la compañía también marca un nuevo hito tecnológico al instalar los aerogeneradores más altos de Asia: cuentan con torres de 153 metros que, unidas a las palas de 62 metros, les permiten alcanzar una altura total de 215 metros. Con ello, Siemens Gamesa vuelve a marcar un récord, tras haber finalizado en verano la instalación de 33 aerogeneradores de 210 metros de altura, los mayores hasta el momento.
“Estamos muy orgullosos de haber firmado este contrato que pone de manifiesto nuestra fortaleza comercial y nos posiciona como el fabricante de aerogeneradores líder en Tailandia”, afirma Álvaro Bilbao, CEO de Siemens Gamesa en la región de Asia- Pacífico, quien añade que “también demuestra la versatilidad de nuestros aerogeneradores y refuerza todo el potencial de I+D de la compañía”.

La entrega de las máquinas se llevará a cabo en agosto de 2018 y su puesta en marcha a finales del mismo año. Además, la compañía se encargará de las tareas de operación y mantenimiento del parque.
Este acuerdo supone el cuarto contrato que la compañía firma en Tailandia, tras haber instalado ya 310 MW en el país. Además de Tailandia, Siemens Gamesa tiene presencia en otros países de Asia como China, Corea del Sur, Filipinas, India, Japón, Sri Lanka, Taiwán y Vietnam lo que supone cerca de 6.500 MW instalados en esos mercados.
Siemens Gamesa es una compañía líder en el sector de la energía eólica, con productos y soluciones tecnológicas para clientes de todo el mundo. Con cerca de 83 GW instalados, la compañía ha suministrado sus productos y tecnología a más de 90 países. Siemens Gamesa cuenta con una de las carteras de producto más versátiles del sector, con tecnologías adaptadas a proyectos tanto offshore como onshore, y soluciones de servicios a la vanguardia, con las que contribuye a generar una energía limpia más asequible y fiable. Siemens Gamesa nació en 2017 como resultado de la fusión de Siemens Wind Power, presente en la industria eólica desde principios de los años 80, y Gamesa, con experiencia en el sector eólico desde 1994.





 

Siemens Gamesa secures its largest-ever order in Thailand

$
0
0
Siemens Gamesa Renewable Energy has achieved a new milestone in its positioning in Asia Pacific having secured its largest-ever contract in Thailand, a market in which it is the leading OEM, responsible for more than 50% of the country's total installed capacity.

Specifically, Siemens Gamesa has reached an agreement with local developer for the supply of 103 of its G126-2.5 MW turbines (260 MW) at the Hanuman wind complex, being built in the province of Chaiyaphum, in northeast Thailand.
This order also marks a new technical feat as it will entail the installation of Asia's highest wind turbines: with a tower height of 153 metres and a blade length of 62 metres, the turbines will stretch 215 metres tall. This marks a new record for Siemens Gamesa, which last summer completed the installation of 33 210-metre tall turbines, the previous record holders.
“We are very proud to have secured this order which highlights our commercial strength and positions us as the leading OEM in Thailand”, said Álvaro Bilbao, Siemens Gamesa's CEO in the Asia-Pacific region, before going on to add that “it also endorses the versatility of our wind turbines and the company's R&D capabilities”.
The turbines will be delivered in May 2018 and commissioned towards the end of that year. The company will also operate and maintain the facility.
This agreement marks the company's fourth order in Thailand, where it has already installed 310 MW. In addition to Thailand, Siemens Gamesa's Asian footprint extends to China, South Korea, the Philippines, India, Japan, Sri Lanka, Taiwan and Vietnam, having installed nearly 6.5 GW in these markets.
 
 


 

Eólica en Chile: Acciona inicia segundo parque

$
0
0
Situado en La Araucanía, San Gabriel contará con 61 aerogeneradores de tecnología Nordex Acciona Windpower, de 3MW de potencia. ACCIONA Energía ha iniciado en la Región de La Araucanía (Chile) la construcción del parque eólico San Gabriel, una instalación de 183 megavatios (MW) de potencia que la compañía operará en propiedad, y que producirá energía libre de emisiones equivalente al consumo de más de 270.000 hogares chilenos.


ACCIONA destinará principalmente la producción del que será su segundo parque eólico en Chile a atender los compromisos derivados de la adjudicación de 506 GWh de suministro eléctrico para clientes regulados, que obtuvo en agosto de 2016 tras licitación pública convocada por la Comisión Nacional de Energía (CNE).

“Es para nosotros una satisfacción anunciar el comienzo de las obras de una nueva instalación renovable en Chile, lo que evidencia con hechos el compromiso de ACCIONA con el país y nuestra solvencia y fiabilidad a la hora de materializar proyectos que contribuyen a crear un sistema energético cada vez más sustentable en nuestra tierra” ha declarado José Ignacio Escobar, gerente general de ACCIONA Energía Chile.

Más de 500 empleos en la construcción

Situado en la comuna de Renaico, a 5 km de esta localidad y unos 550 km al sur de Santiago de Chile el parque eólico San Gabriel estará integrado por 61 aerogeneradores AW132/3000 de tecnología Nordex Acciona Windpower, un modelo diseñado para optimizar la captación de energía en emplazamientos de vientos bajos. Con 3 MW de potencia nominal, cada aerogenerador montará un rotor de 132 metros de diámetro sobre torre de hormigón de 120 metros de altura de buje, reforzada con tecnología antisísmica.

San Gabriel será el primer parque eólico en Chile en incorporar tecnología de torre de hormigón -en la que ACCIONA cuenta con una gran experiencia internacional- que resulta indicada para aquellos emplazamientos en que es importante alcanzar mayores alturas al objeto de captar un mayor recurso eólico e incrementar la producción energética.

Las torres se fabricarán en una planta provisional creada en las inmediaciones, un modelo que incrementa el grado de localización de componentes, la creación de empleo local y, en definitiva, el impacto en la economía de la zona donde se implanta un proyecto eólico. Asimismo requiere menor actividad de transporte, lo que reduce costes y afecciones ambientales asociadas.

La instalación de San Gabriel supondrá la creación de unos 510 empleos de promedio durante la construcción y de otros 15 puestos de trabajo estables durante la operación y mantenimiento del mismo, a los que hay que añadir el efecto indirecto en el desarrollo económico de la región.

Contacto con las comunidades

En sintonía con su filosofía de colaboración con las comunidades que se emplazan en el entorno directo de sus proyectos, ACCIONA viene manteniendo contactos frecuentes con los agentes sociales de la zona desde el inicio del proyecto, facilitándoles información sobre su evolución y sentando las bases de una cooperación a largo plazo. Como resultado de ese diálogo se han alcanzado acuerdos de colaboración con diversas organizaciones sociales orientados a la mejora de la calidad de vida de los vecinos en aspectos tales como desarrollo productivo, saneamiento básico e iluminación pública, entre otras iniciativas de promoción comunitaria.

Desde el punto de vista ambiental, tras su entrada en operación, prevista para septiembre de 2019, el nuevo parque evitará anualmente la emisión de unas 632.000 toneladas anuales de CO2 en centrales de carbón, con un efecto depurativo para la atmósfera equivalente al de 31 millones de árboles.

Creciente presencia en Chile

La puesta en marcha de San Gabriel elevará la capacidad renovable de ACCIONA en Chile a 474 MW, al sumarse al parque eólico Punta Palmeras (45 MW), en la región de Coquimbo, conectado en 2014, y la planta fotovoltaica El Romero Solar (246 MWp), en Atacama, en servicio desde noviembre de 2016. ACCIONA tiene en cartera otros proyectos eólicos y fotovoltaicos en diferentes fases de desarrollo.

Previamente a la adjudicación de 2016, la compañía resultó ganadora en la primera subasta para generadores renovables y convencionales organizada por la CNE y resuelta en diciembre de 2014, donde se adjudicó el suministro de hasta 600 GWh/año para el período 2018-2032.

La compañía ha suscrito asimismo varios contratos de suministro a clientes corporativos (PPA, por sus siglas en inglés) en Chile, entre los que destacan el firmado con Google para atender el consumo de su centro de datos y el resto de sus instalaciones en el país, así como el firmado con el grupo de distribución Falabella para abastecer a cerca de cien de sus establecimientos en Chile.

En otros ámbitos de actividad, ACCIONA está presente en Chile desde 1993, inicialmente a través de su división de Infraestructuras, con proyectos relevantes en construcción de autopistas, centros hospitalarios, centrales hidroeléctricas e infraestructuras para el sector minero. En el negocio del Agua, ACCIONA ha diseñado, construido y opera una gran desaladora para la industria minera en Copiapó. Así mismo ha construido varias instalaciones de tratamiento de aguas residuales.
Acciona Energía es un operador global en energías renovables con más de 20 años de experiencia en el sector y casi 9.000 MW en propiedad. Dispone de 220 parques eólicos que suman 7.298 MW; 79 centrales hidroeléctricas (888 MW); seis plantas termosolares (314 MW); centrales fotovoltaicas que totalizan 389 MWp y tres plantas de biomasa (61 MW). La compañía desarrolla proyectos para terceros en las tecnologías eólica y fotovoltaica, y comercializa energía a grandes clientes.







Acciona has started construction on the San Gabriel wind farm in the region of La Araucanía (Chile).

$
0
0
ACCIONA Energía has started construction work on the San Gabriel wind farm in the region of La Araucanía (Chile). The company will own and operate the 183-megawatt (MW) facility which will produce emission-free electricity equivalent to the consumption of over 270,000 Chilean homes.


ACCIONA’s production from what will be its second wind farm in Chile will be mainly used to cover the 506 GWh of electric power awarded in a public tender called by the Chilean National Energy Commission (CNE) in August 2016.

“It is with great satisfaction that we announce the start of building work on a new renewables facility in Chile, demonstrating ACCIONA’s commitment to the country through concrete actions and our solvency and reliability when it comes to materializing projects that help to create an ever more sustainable energy system in our country” says ACCIONA Energía Chile General Manager José Ignacio Escobar.

More than 500 jobs created in the construction phase

Located 5 kilometers east of the municipality of Renaico, around 550 km south of Santiago de Chile, the San Gabriel wind farm will be equipped with sixty-one AW132/3000 wind turbines of Nordex Acciona Windpower technology. This model is designed to optimize energy capture on sites with low wind speeds. With rated power of 3 MW, each turbine will be powered by a 132-meter-diameter rotor on a concrete tower with a hub height 120 meters, reinforced with anti-earthquake technology.

San Gabriel will be the first wind farm in Chile to incorporate concrete tower technology, a field in which ACCIONA has extensive international experience. It is suitable for sites where it is important to reach greater tower heights to capture the wind resource and increase energy production.

The towers will be manufactured in a provisional plant built near the site, a model that increases the level of local outsourcing of components, the creation of jobs locally and, basically, a greater impact on the economy of the area where the wind power project is implemented. It also requires less transport, which reduces costs and the associated environmental impacts.

The installation of San Gabriel will mean the creation of around 510 jobs on average during the construction period, and another 15 permanent jobs for the operation and maintenance of the wind farm, plus the knock-on effect on the economic development of the region.

Contact with communities

In line with its philosophy of cooperation with communities that live in the areas directly affected by its projects, ACCIONA has maintained frequent contacts with regional stakeholders since the start of the project, informing them about the progress made and laying the groundwork for long-term cooperation. A number of cooperation agreements have been reached in this process of dialogue with different social organizations, the aim being to improve the quality of life of residents in aspects such as productive development, basic sanitation and street lighting, among other community promotion    initiatives.

From the environmental point of view, after the wind farm enters service (planned for September 2019) it will avoid the emission to the atmosphere of around 632,000 tonnes of C02 per annum from coal-fired power plants, with a cleaning effect on the air equivalent to the presence of 31 million trees.

A growing presence in Chile

The start-up of San Gabriel will take ACCIONA’s renewables capacity in Chile to 474 MW, joining the Punta Palmeras (45 MW) wind farm in Coquimbo (grid connected in 2014) and the El Romero Solar photovoltaic plant (246 MWp) in Atacama, in service since November 2016. ACCIONA has other wind and photovoltaic projects in the pipeline at different stages of development.

Prior to the 2016 tender, the company was awarded capacity in the first auction for renewable and conventional energy generators organized by the CNE. In December 2014 it was allocated up to 600 GWh/year for the 2018-2032 period.

Additionally, the company has signed several PPA contracts with corporate clients in Chile. Two that stand out are the one signed with Google to cover the electricity consumption of its data center and other facilities in the country, and another with the distribution chain Falabella to supply around one hundred of its retail stores in Chile.

ACCIONA has been present in other fields of activity in Chile since 1993, initially through its Infrastructure division, with major projects in the construction of highways, hospitals, hydroelectric plants and infrastructures for the mining sector. In the water business, ACCIONA has designed, built and operates a large desalination plant for the mining industry in Copiapó. It has also constructed a number of wastewater treatment plants.
About us
ACCIONA Energía is a global operator in renewable energies with over 20 years’ experience in the sector and almost 9,000 MW under its ownership. It owns and operates 220 wind farms totaling 7,298 MW; 79 hydro plants (888 MW); 6 CSP plants (314 MW); photovoltaic plants totaling 389 MWp and three biomass plants (61 MW). The company develops projects for customers in wind and photovoltaic power, and markets power to large customers.
 



 

Siemens Gamesa presenta dos aerogeneradores que incrementan la energía eólica

$
0
0
El nuevo aerogenerador marino (offshore), con rotor de 167 metros y tecnología direct drive, ofrecerá un 20% más de producción anual de energía eólica.


Siemens Gamesa Renewable Energy (SGRE) ha combinado la experiencia de dos líderes del sector eólico desde la fusión anunciada a principios de 2017. En este contexto, la compañía ha anunciado el lanzamiento del aerogenerador SG 4.2-145, equipado con multiplicadora y enmarcado dentro de la nueva plataforma Siemens Gamesa 4.X. El modelo SG 4.2-145 ofrece el coste de energía (LCoE) más competitivo para emplazamientos con vientos medios dentro del segmento de 4MW y marca el inicio de una nueva generación de aerogeneradores onshore de alto rendimiento, equipados con multiplicadora. Esta nueva turbina onshore incrementa la producción anual de energía en un 21%.

Asimismo, SGRE ha presentado el nuevo aerogenerador offshore con tecnología direct drive SG 8.0-167 DD, con un diámetro de rotor de 167 metros. Las palas B82 ofrecen un área de barrido un 18% superior y un incremento del 20% en la producción anual de energía respecto a su predecesora, la SWT-7.0-154. La nueva turbina offshore SG 8.0-167 DD incorpora la tecnología probada de la plataforma direct drive, combinada con un nuevo rotor de mayores dimensiones, para ofrecer a sus clientes mayor rentabilidad a la vez que minimiza los costes y riesgos asociados.

Ambos productos reflejan la nueva estrategia de SGRE “Un segmento, una tecnología”, anunciada a principios de noviembre. Para 2020, la compañía contará con una tecnología por segmento. En eólica terrestre, Siemens Gamesa optimizará su enfoque tecnológico y se centrará en aerogeneradores con multiplicadora. Por su parte, en el segmento marino, la compañía ofrecerá exclusivamente su plataforma direct drive.

“Esta estrategia nos permitirá focalizar nuestra oferta en el medio plazo y aprovechar las economías de escala de nuestra cadena de suministro. De esta forma podemos ofrecer mayor valor añadido a nuestros clientes”, explica Markus Tacke, CEO de SGRE. 


La SG 4.2-145 con multiplicadora, parte de la nueva plataforma para el segmento terrestre

El modelo onshore SG 4.2-145 ofrece una potencia nominal de 4.2 MW y un rotor de 145 metros. Diseñada para vientos medios, se adapta a un amplio abanico de emplazamientos. El nuevo modelo se basa en conceptos probados, que incluyen una multiplicadora de tres etapas y un generador de inducción de doble alimentación (DFIG), e incorpora la experiencia acumulada por ambas compañías en la instalación de cerca de 72 GW onshore en todo el mundo. Como parte de la plataforma Siemens Gamesa 4.X, la empresa está desarrollando actualmente nuevos modelos para vientos bajos y medios, con rotores de 132 y por encima de 150 metros.

El nuevo aerogenerador ofrece máxima flexibilidad en cuanto a su rango de potencia, que puede ajustarse entre 4 y 4,4 MW, así como diferentes configuraciones de torres para alturas de buje de 107,5; 127,5 y 157,5 metros. Dos opciones de convertidores hacen que la turbina cumpla con los requisitos de conexión a red más exigentes.

La nueva pala de 71 metros minimiza los riesgos de diseño de perfil aerodinámico gracias a su validación en túnel de viento. Además, gracias a su elevado grosor en la raíz de la pala, ésta alcanza una masa reducida a mínimo coste. Las reducciones de cuerda en las secciones intermedias limitan las cargas máximas y una punta de pala optimizada mitiga el nivel de ruido (106,9 dB a plena carga).

Comparado con el modelo G132-3.465 MW, la nueva SG 4.2-145 tiene un área de barrido un 21% superior, lo que incrementa en la misma proporción la producción anual de energía. La instalación del primer prototipo está prevista para el otoño de 2018, mientras que el certificado tipo se espera para el inicio de 2019. La producción comenzará también a principios de ese año.

“Con la nueva plataforma Siemens Gamesa 4.X ofrecemos más opciones a nuestros clientes, ayudándolos a maximizar la rentabilidad de sus activos”, dice Ricardo Chocarro, CEO para el negocio onshore de SGRE. “La experiencia combinada de ambas compañías nos permite ofrecer las mejores soluciones del mercado para turbinas de más de 4 MW y para una amplia gama de emplazamientos con vientos medios. Para sitios con vientos bajos lanzaremos en breve una variante con un rotor de más de 150 metros, mientras que para aquellos con vientos altos el diámetro del rotor será de 132 metros”.

El aerogenerador marino direct drive de 8 MW, ahora disponible con rotor de 167 metros

El nuevo modelo de la plataforma offshore, SG 8.0-167 DD, contará con un rotor de 167 metros. Basado en tecnología probada, permitirá un tiempo de lanzamiento al mercado reducido al reutilizar los componentes de su predecesora, la SWT-7.0-154. En enero de 2017, ya se instaló y puso en marcha el primer prototipo de 8MW en Østerild, Dinamarca, en el que actualmente se está realizando un programa de validación centrado en el sistema eléctrico. Además, está previsto que se instale un nuevo prototipo SG 8.0-167 DD, también en Østerild, en 2018, en el que se realizará un plan de validación para las palas.

La nueva SG 8.0-167 DD estará disponible para instalación en 2020. Para acelerar su disponibilidad comercial, Siemens Gamesa colabora con Fraunhofer IWES en Bremerhaven (Alemania). Además de las pruebas internas y de la operación del prototipo, la nacelle de 8 MW se ensayará en el banco de pruebas de última generación DyNaLab (Dynamyc Nacelle Testing Laboratory). El exhaustivo programa de validación, que comenzará en la primavera de 2018 y terminará a finales del mismo año, incluirá simulaciones de cargas y de cumplimiento de conexión a red.

“El lanzamiento de la SG 8.0-167 DD demuestra nuestro compromiso con la industrialización del segmento offshore”, explica Andreas Nauen, CEO de la división Offshore en SGRE. “Con un rotor mayor, podemos ofrecer a nuestros clientes mayor producción con menos viento. La flexibilidad de la plataforma posibilita además reducir el coste de la energía con riesgos muy limitados”, añade.

Como ocurrió con el paso de 7 a 8 MW, la tecnología de la plataforma offshore DD permite la reutilización de todos sus componentes con la excepción de las palas. Gracias a diversas mejoras tecnológicas en sus componentes estructurales, los ingenieros de SGRE han conseguido diseñar una pala de 81,5 metros con un incremento de peso menor al 20% con respecto a la anterior de 75 metros. Ambos tipos (B82 y B75) son de fibra de vidrio y de una sola pieza.

Con unos 2.500 aerogeneradores instalados en el mar, cerca de 11 GW instalados y proyectos pioneros que se remontan a 1991, SGRE tiene el mayor track record del sector entre los fabricantes de turbinas offshore. A fecha de septiembre de 2017, más de 300 turbinas de la plataforma direct drive se han entregado a diversos clientes. SGRE tiene una amplia experiencia en esta tecnología, ya que ha instalado más de 2.230 turbinas direct drive en casi diez años.

Con el lanzamiento de la SG 4.2-145 y la SG 8.0-167 DD, SGRE ha adoptado una denominación de producto basada en el nombre de la compañía, de donde provienen las dos primeras letras (SG). Estas siglas se completan con la potencia nominal de cada modelo y el tamaño de su rotor. Además, todas las variantes con tecnología direct drive incorporan las siglas DD al final.

La división de Servicios incrementa su oferta multi-tecnología

Para reducir los costes operativos de los parques eólicos, la división de Servicios de SGRE ha anunciado que amplía su oferta de soluciones para aerogeneradores de otros fabricantes: no solo realizará tareas de mantenimiento sino también de extensión de vida y retrofit para incrementar la producción anual de energía. Como alternativa a la repotenciación, las soluciones de SGRE permiten prolongar la vida útil de los aerogeneradores más allá de los 20 años, una opción especialmente atractiva en países con parques antiguos del norte de Europa, España, China e India, entre otros.




Siemens Gamesa launches new wind power solutions

$
0
0
Siemens Gamesa Renewable Energy (SGRE) has combined the experience of two strong players, building on the merger that took place in early 2017. Thanks to this process, the company is now launching the new geared turbine SG 4.2-145, as part of the new geared turbine platform Siemens Gamesa 4.X. The model SG 4.2-145 offers best-in-class LCoE at medium wind sites in the 4-megawatt segment and marks the start of a next-generation product platform for high performance geared onshore wind turbines. This new turbine for Onshore will increase the annual energy production by 21%. Additionally, SGRE launches the new direct drive offshore wind turbine SG 8.0-167 DD, with a rotor diameter of 167 meters. Its B82 blades will allow for an 18% greater swept area and up to 20% higher annual energy production than its predecessor SWT-7.0-154. As part of the proven offshore direct drive platform, the SG 8.0-167 DD utilizes known technology, combined with its rotor upgrade, to offer customers reliable revenue streams with reduced cost of energy and mitigated risk.
 Both product launches are part of SGRE`s new “One Segment/One Technology” philosophy announced in early November. By 2020, the company will have one technology per business segment. In onshore, SGRE will streamline its technology approach and focus on geared solutions. In offshore, SGRE opts for the direct-drive platform only.
“The single platform strategy helps the company to transition to a more focused offer in the medium-term by utilizing economies of scale throughout the supply chain. This is how we will deliver lasting value to our customers”, says CEO Markus Tacke. Recently launched models based on the proven product platforms of Siemens Gamesa will help to bridge into the next years when the new geared platform goes into serial production.
Geared SG 4.2-145 wind turbine as part of next-generation onshore product platform
The onshore model SG 4.2-145 is rated at 4.2 megawatts and features a 145-meter rotor. Its medium wind design will cover a broad range of sites. The technology is based on proven concepts such as a 3-stage gearbox and a Double Fed Induction Generator (DFIG). The new turbine incorporates the experience and expertise of both companies, who together have an installed global onshore wind fleet of nearly 72 gigawatts. Based on the Siemens Gamesa 4.X platform, further models for high and low-wind sites with rotor diameters of 132 and above 150 meters are currently under development.
The new turbine offers maximum flexibility regarding a power range that can be adjusted between 4.0 and 4.4 MW and to different tower configurations that allow for hub heights of 107.5, 127.5 and 157.5 meters. Two converter options help to comply even with enhanced demands in grid performance. The new 71m blades offer a risk-reduced design in terms of airfoil polar curves through wind tunnel test validation. Due to a high absolute thickness at its root sections the new 71m blade achieves reduced mass at minimized cost. Chord alleviations in the mid-sections reduce maximum loads while optimized tips mitigate noise: At full load the turbine’s noise level is 106.9 dB. Compared to the model G132-3.465 MW the new SG 4.2-145 offers an increased swept area of 21% resulting in an enhanced AEP by more than 21 percent. The prototype installation is planned for autumn 2018, while certification is expected for 2019. Start of production will be in early 2019.
“With our new geared onshore Siemens Gamesa 4.X platform we offer even more technology options to our customers, helping to make their projects a profitable and sustainable asset,” says Ricardo Chocarro, CEO Onshore at SGRE. “With the combined expertise in our merged company we offer a best-in-class solution in the market for turbines over 4 MW for a wide range of medium wind sites. For low wind sites we will soon launch a rotor option with a diameter above 150 meters. For high wind sites the turbine will be available with the proven 132 meter rotor.”
8-megawatt direct-drive offshore wind turbine now with167-meter rotor
The latest turbine on the Offshore DD platform, the SG 8.0-167 DD offers a rotor diameter of 167 meters. It will utilize proven technology and allow a short time to market by re-using all other components from its predecessor, the SWT-7.0-154. In January 2017, the first prototype in the 8MW class was installed and commissioned according to plan in Østerild, Denmark. While a testing program with focus on the electrical system is performed on this prototype, an additional SG 8.0-167 DD prototype will be installed in Østerild in 2018. With a larger rotor, it will be used mainly for blade tests. The SG 8.0-167 DD is expected to be market-ready in 2020. To accelerate time-to-market, Siemens Gamesa is collaborating with Fraunhofer IWES in Bremerhaven, Germany. In addition to in-house testing and prototype operation, the nacelle of the 8 MW turbine will perform laboratory tests in the institute’s cutting edge Dynamic Nacelle Testing Laboratory (DyNaLab). The comprehensive program including load simulations and grid compliance tests will start in spring and will be completed by the end of 2018.
“The introduction of the SG 8.0-167 DD shows our continued dedication to industrializing the offshore market,” says Andreas Nauen, CEO Offshore at SGRE. “With the rotor upgrade we offer our customers even higher energy yields at lower wind speeds. The flexibility of the offshore direct drive platform helps to reduce the Levelized Cost of Energy (LcoE) and at the same time mitigate risks,” he adds.
Similar to the upgrade from seven to eight megawatts, the technology on the offshore direct drive platform allows for re-using most components. Only the rotor will be upgraded. Through technology improvements in the blades’ structural components, SGRE engineers have managed to design the 81.5-meter long B82 blade with less than a 20 percent increase in mass compared to the B75. Both blade types are manufactured as fiberglass components, cast in one piece using SGRE`s patented integral blade process.
With a total capacity of approximately 11 gigawatts installed offshore and pioneering projects dating back to 1991, Siemens Gamesa Renewable Energy has the longest track record of all wind turbine suppliers in the offshore industry. By end of September 2017 more than 300 units of the offshore direct drive platform have been handed over to customers. SGRE has a vast experience with the direct-drive technology having installed more than 2,230 units in almost 10 years.
With the launch of the new SG 4.2-145 and the SG 8.0-167 DD, SGRE has adopted a product denomination fitting the company name. The first two letters stand for the company name. They are followed by the turbine’s rating, then the rotor diameter. All new SG direct drive units have a DD at the end of the product name.
Siemens Gamesa Wind Service increases its multi-brand service capabilities
To drive down operational costs of wind projects, Siemens Gamesa Wind Service announces to expand its O&M scope to 3rd party technology. This approach does not only include maintenance of the wind turbines but also life extension and retrofit solutions for enhanced AEP. As an alternative to repowering, SGRE’s Service Business Unit offers an extension of turbine lifetime beyond 20 years to aging fleets in Northern Europe, Spain, China, India and other markets.




 
 


Siemens Gamesa will install 113 SG 8.0-167 DD turbines at three offshore wind farms

$
0
0
Siemens Gamesa Renewable Energy (SGRE) has been selected today by Vattenfall to supply close to 1 GW at three offshore wind power plants being developed in Danish waters.
Specifically, the company has signed today an agreement with Vattenfall for the supply 72 SG 8.0-167 DD turbines at the Danish Kriegers Flak offshore wind project –with a total capacity of 600 MW. This will be the largest offshore wind power plant in the Baltic Sea.
The ceremony of the signature of this agreement has taken place today at WindEurope international trade fair, with the presence of Markus Tacke, CEO of SGRE, and Andreas Nauen, Offshore CEO of SGRE. From Vattenfall, Gunnar Groebler, Senior Vice President of Business Area Wind, and Michael Simmelsgaard, Head of Offshore Wind, have attended.
The installation of the turbines is scheduled for February 2021 and the commissioning for the end of that same year.
In addition, Siemens Gamesa has also been selected as preferred supplier by Vattenfall for the supply of the turbines, for both Vesterhav North (180 MW) and Vesterhav South (170 MW) located nearshore at the west-coast of Denmark in the North Sea with a combined capacity of approximately 350 MW. Both together will feature 41 SG 8.0-167 DD turbines. Installation of the turbines will start in 2020 and the commissioning for the end of that same year.
Andreas Nauen, CEO Offshore at Siemens Gamesa, said: "We are pleased that Vattenfall has selected Siemens Gamesa for these projects. The advanced model of our proven direct drive offshore wind turbine platform and our advanced services will leverage the energy output of these lighthouse projects and help to move offshore wind into the energy mainstream in Europe."
The energy production of one Siemens Gamesa 8-MW machine is sufficient to supply about 8,000 European households with electricity. The power supplied of these 950-MW projects will be sufficient to cover the annual electricity consumption of close to one million households.
Siemens Gamesa and Vattenfall have collaborated on several wind power plants including 288 MW DanTysk and 288 MW Sandbank offshore projects in the German North Sea and 110 MW Lillgrund offshore project in the Swedish part of Øresund.
New 8 MW direct-drive offshore wind turbines for these projects
Siemens Gamesa will install 113 of its new SG 8.0-167 DD turbines in these three projects. The latest turbine on the Siemens Gamesa offshore Direct Drive platform offers a rotor diameter of 167 meters. Its B82 blades will allow for an 18% greater swept area and up to 20% higher annual energy production than its predecessor SWT-7.0-154. As part of the proven offshore direct drive platform, the SG 8.0-167 DD utilizes known technology, combined with its rotor upgrade, to offer customers reliable revenue streams with reduced cost of energy and mitigated risk.
With a total capacity of approximately 11 gigawatts installed offshore and pioneering projects dating back to 1991, Siemens Gamesa Renewable Energy has the longest track record of all wind turbine suppliers in the offshore industry. By end of September 2017 more than 300 units of the offshore direct drive platform have been handed over to customers. SGRE has a vast experience with the direct-drive technology having installed more than 2,230 units in almost 10 years.





 

Siemens Gamesa suministra 950 MW para Vattenfall en tres proyectos offshore en Dinamarca

$
0
0
Siemens Gamesa Renewable Energy (SGRE) instalará 113 aerogeneradores SG 8.0-167 DD en tres parques eólicos marinos.
Siemens Gamesa Renewable Energy (SGRE) ha sido elegida por Vattenfall para suministrar cerca de 1 GW a tres plantas eólicas marinas que se están desarrollando en la costa danesa.
En concreto, la compañía ha firmado hoy un acuerdo con Vattenfall para suministrar 72 turbinas SG 8.0-167 DD al proyecto offshore danés de Kriegers Flak, con una capacidad total de 600 MW, y que se convertirá en la mayor planta eólica marina del Báltico.
La ceremonia para la firma del acuerdo ha tenido lugar hoy en el marco de la feria internacional WindEurope, y ha contado con la presencia de Markus Tacke, CEO de SGRE, de Andreas Nauen, CEO de Offshore en SGRE, mientras que por parte de Vattenfall han asistido Gunnar Groebler, Vicepresidente de la división eólica y Michael Simmelsgaard, Responsable del área de Offshore.
La instalación de las turbinas está prevista para febrero de 2021, mientras que su puesta en marcha concluirá antes de finales del mismo año.
Además, SGRE ha sido también seleccionada por Vattenfall como proveedor preferente para suministrar aerogeneradores tanto para Vesterhav Norte (180 MW) como para Vesterhav Sur (170 MW), ubicados cerca de la costa oeste de Dinamarca, en el Mar del Norte, y que cuentan con una capacidad combinada cercana de 350 MW. Ambos parques dispondrán en total de 41 turbinas SG 8.0-167 DD. Su instalación comenzará en 2020 y la puesta en marcha tendrá lugar a final del año.
“Estamos muy agradecidos de que Vattenfall haya seleccionado a Siemens Gamesa para estos proyectos. El último modelo de nuestra probada plataforma offshore Direct Drive, junto con nuestros servicios de alto valor añadido, impulsarán la producción de energía de estos importantes proyectos, ayudando a posicionar la energía eólica marina dentro del mix energético europeo”, ha afirmado Andreas Nauen, CEO Offshore de SGRE.
Una única turbina de 8 MW es capaz de generar energía eléctrica para unos 8.000 hogares europeos, de manera que la energía generada por estos proyectos -950 MW- cubriría el consumo eléctrico anual de cerca de un millón de hogares.
Siemens Gamesa y Vattenfall han colaborado en varios proyectos eólicos, entre los que se incluyen los parques offshore DanTysk y Sandbank, ambos de 288 MW, en la costa alemana del Mar del Norte; o el proyecto offshore Lillgrund, de 110 MW, en la costa sueca de Øresund.
Nuevos aerogeneradores marinos Direct Drive de 8 MW para estos proyectos
SGRE instalará 113 unidades de su nuevo aerogenerador SG 8.0-167 DD para estos tres proyectos. Este nuevo modelo de plataforma offshore contará con un rotor de 167 metros de diámetro. Las palas B82 ofrecen un área de barrido un 18% superior y un incremento del 20% en la producción anual de energía respecto a su predecesora, la SWT-7.0-154. La nueva turbina offshore SG 8.0-167 DD incorpora la tecnología probada de la plataforma direct drive, combinada con un nuevo rotor de mayores dimensiones, para ofrecer a sus clientes mayor rentabilidad a la vez que minimiza los costes y riesgos asociados.
Con una capacidad total aproximada de 11 GW instalados y proyectos pioneros que se remontan a 1991, SGRE tiene el mayor track record del sector entre los fabricantes de turbinas offshore. A fecha de septiembre de 2017, se han entregado a diversos clientes más de 300 turbinas de la plataforma direct drive. SGRE tiene una amplia experiencia en esta tecnología, ya que ha instalado más de 2.230 turbinas direct drive en casi diez años.






GE Renewable Energy hits 60 GW of global onshore wind energy installed capacity

$
0
0
GE Renewable Energy today announced it has more than 60,000 MW of onshore wind turbines installed across the globe. This significant milestone was passed thanks to large projects commissioned in North America as well as in Europe (Turkey, Spain and Romania). The company has now installed over 35,000 wind turbines in 36 countries.
Pete McCabe, President & CEO of GE's Onshore Wind Business said "This milestone is a testimony to our commitment to the wind industry, which is continuing to grow globally. Wind power represents 34% of forecasted renewable energy installs up until 2022. We're looking forward working closely with our partners and customers to keep increasing the wind energy share in the overall energy systems globally."
In Europe, GE Renewable Energy has also passed a key milestone, having now installed over 10GW of wind capacity in the region.
In recent months, the company has celebrated key wins that are expected to bring its installed base in Europe to over 13GW by the end of 2019.
  • Several wind farms will be developed with Forestalia in Spain, for a total of 1.5GW, which would more than double GE's wind installed capacity in the country.
  • GE Renewable Energy and GE Energy Financial Services announced the 650MW Markbygden ETT wind farm in Sweden earlier this month, where the company's installed base will jump from 243MW to 893MW – the equivalent of tripling the capacity installed with just one wind farm.
  • In Serbia, a booming market for wind power in Eastern and Central Europe, the company has recently announced it will provide 153MW for the Cibuk 1 wind farm.
Europe is also a region where strategic partnerships have recently been announced for GE Renewable Energy. The company is providing 37MW of wind power for the Tullahennel wind farm in County Kerry, from which Microsoft will purchase 100% of the energy produced for a duration of 15 years. The Corporate Power Purchase Agreement is Microsoft's first agreement of the kind outside of the United States and will help fulfill the company's growing energy demands from its Cloud Services bases in Ireland.
McCabe said, "We are particularly excited about our growth across Europe, a region with excellent wind resources, a compelling vision of the importance of renewable energy, and an appreciation of the need for stable policy to bring the economic and environment benefits wind power can deliver."
GE Renewable Energy is attending the Wind Europe 2017 Conference and Exhibition (Booth #1B40) in Amsterdam from November 28 to November 30, 2017.
GE Renewable Energy is a $10 billion start-up that brings together one of the broadest product and service portfolios of the renewable energy industry. Combining onshore and offshore wind, hydro and innovative technologies such as concentrated solar power and more recently turbine blades, GE Renewable Energy has installed more than 400+ gigawatts capacity globally to make the world work better and cleaner. With more than 22,000 employees present in more than 55 countries, GE Renewable Energy is backed by the resources of the world's first digital industrial company. Our goal is to demonstrate to the rest of the world that nobody should ever have to choose between affordable, reliable, and sustainable energy.



 
 
 

Eólica en India: Siemens Gamesa Renewable Energy instalará 100 aerogeneradores

$
0
0
Se trata de un importante acuerdo para la compañía desde que se produjo la suspensión temporal del mercado eólico indio.
Siemens Gamesa Renewable Energy (SGRE), el fabricante de aerogeneradores líder en India, sigue fortaleciendo su posicionamiento en este mercado al adjudicarse un contrato con Orange Renewable para la construcción llave en mano de un parque de 200 MW en Poovani, en el estado de Tamil Nadu. Este proyecto está siendo promovido por la empresa de Singapur AT Holdings.

Se trata de un importante acuerdo para la compañía desde que se produjo la suspensión temporal del mercado indio. Según los términos del contrato, Siemens Gamesa se encargará de toda la infraestructura necesaria para la operación del parque, así como del suministro de 100 aerogeneradores G114-2.0 MW con altura de buje de 106 metros, un modelo especialmente diseñado para maximizar el rendimiento de las turbinas el mercado indio en las zonas con poco viento típicas de India. La puesta en marcha del parque está prevista para febrero de 2019.

La energía limpia y sostenible de este proyecto evitará la emisión a la atmósfera de 651.000 toneladas de CO2, al mismo tiempo que generará la energía suficiente para el consumo eléctrico anual de 155.00 hogares. Asimismo, el parque estará conectado al sistema de transmisión interestatal indio, que permite el flujo de energía desde los estados con más recurso renovable para ayudar al resto a cumplir con su obligación de compra renovable y asegurar el suministro de energía a largo plazo a un precio fijo.

“Estamos muy contentos de haber alcanzado este acuerdo con Orange Renewable, uno de los promotores independientes de más rápido crecimiento en India. Este pedido aumenta nuestra confianza de cara a la próxima fase de crecimiento para Siemens Gamesa en el país. Con el modelo G114-2.0 MW T-106, una turbina diseñada para el mercado indio, ofrecemos un alto valor añadido a nuestros clientes con soluciones que se adaptan a sus necesidades”, comentó Ramesh Kymal, CEO Onshore de Siemens Gamesa en India.


“Estamos encantados de asociarnos con Siemens Gamesa para nuestro último proyecto eólico, que sitúa nuestra flota de turbinas Siemens Gamesa hasta los 500 MW y nuestra cartera total en un 1GW. Estamos orgullosos de haber logrado este crecimiento en un breve periodo de tiempo, manteniendo un alto nivel de compromiso con la tecnología, el medio ambiente, la salud y la sostenibilidad. Nuestra decisión está motivada por la confianza en Siemens Gamesa como líder tecnológico global. Por nuestra parte, nos comprometemos a ofrecer soluciones energéticas óptimas para el país", indicó Sudhir Nunes, director ejecutivo de Wind, Orange Renewable.

Presente en India desde 2009, Siemens Gamesa ha instalado 5 GW en este país. La compañía se ha erigido por tercer año consecutivo como el primer fabricante del país, según la consultora MAKE. 





 

GE Renewable Energy hits 60 GW of global onshore wind energy installed capacity

$
0
0
GE Renewable Energy today announced it has more than 60,000 MW of onshore wind turbines installed across the globe. This significant milestone was passed thanks to large projects commissioned in North America as well as in Europe (Turkey, Spain and Romania). 

The company has now installed over 35,000 wind turbines in 36 countries.

Pete McCabe, President & CEO of GE’s Onshore Wind Business said “This milestone is a testimony to our commitment to the wind industry, which is continuing to grow globally. Wind power represents 34% of forecasted renewable energy installs up until 2022. We’re looking forward working closely with our partners and customers to keep increasing the wind energy share in the overall energy systems globally.”
In Europe, GE Renewable Energy has also passed a key milestone, having now installed over 10GW of wind capacity in the region.
In recent months, the company has celebrated key wins that are expected to bring its installed base in Europe to over 13GW by the end of 2019.
  • Several wind farms will be developed with Forestalia in Spain, for a total of 1.5GW, which would more than double GE’s wind installed capacity in the country.
  • GE Renewable Energy and GE Energy Financial Services announced the 650MW Markbygden ETT wind farm in Sweden earlier this month, where the company’s installed base will jump from 243MW to 893MW – the equivalent of tripling the capacity installed with just one wind farm.
  • In Serbia, a booming market for wind power in Eastern and Central Europe, the company has recently announced it will provide 153MW for the Cibuk 1 wind farm.
Europe is also a region where strategic partnerships have recently been announced for GE Renewable Energy. The company is providing 37MW of wind power for the Tullahennel wind farm in County Kerry, from which Microsoft will purchase 100% of the energy produced for a duration of 15 years. The Corporate Power Purchase Agreement is Microsoft’s first agreement of the kind outside of the United States and will help fulfill the company’s growing energy demands from its Cloud Services bases in Ireland.
McCabe said, “We are particularly excited about our growth across Europe, a region with excellent wind resources, a compelling vision of the importance of renewable energy, and an appreciation of the need for stable policy to bring the economic and environment benefits wind power can deliver.”
GE Renewable Energy is attending the Wind Europe 2017 Conference and Exhibition (Booth #1B40) in Amsterdam from November 28 to November 30, 2017.
GE Renewable Energy is a $10 billion start-up that brings together one of the broadest product and service portfolios of the renewable energy industry. Combining onshore and offshore wind, hydro and innovative technologies such as concentrated solar power and more recently turbine blades, GE Renewable Energy has installed more than 400+ gigawatts capacity globally to make the world work better and cleaner. With more than 22,000 employees present in more than 55 countries, GE Renewable Energy is backed by the resources of the world’s first digital industrial company. Our goal is to demonstrate to the rest of the world that nobody should ever have to choose between affordable, reliable, and sustainable energy.
 
Viewing all 10464 articles
Browse latest View live